On the other hand, each successive generation – whether a smart sensor, IoT gateway, autonomous controller, smart appliance – is expected to provide more capabilities and capacity, handle more complex situations more intelligently, and respond more quickly. Traditionally, microcontrollers have been the main choice in power-conscious systems such as those used in IoT applications. However, with the increasing demand of processing power, microprocessors are being sought out.
How do the Latest Embedded Processors Help Minimise Power Consumption?
As the apparently conflicting demands for lower power with greater performance and sophistication intensify, frugal power management is increasingly important using techniques like granular low-power operating modes with gating of clock signals to halt specific peripherals and power gating of unneeded domains to avoid leakage current.
As well as the intrinsic energy savings gained through the latest 28nm FD-SOI process technology, the Energy Flex architecture features advanced design techniques and heterogeneous domain processing. Application-level processing running a rich operating system on the chip’s Cortex-A35 cores is separated from real-time processing managed by an RTOS running on the Cortex-M33 embedded-class core. An optional Fusion DSP in the real-time domain handles low-power keyword detect, and there is a separate Flex domain with a HiFI 4 DSP for advanced audio and voice processing. Altogether, Energy Flex improves efficiency by up to 75%.
Then there is the µPower subsystem, controlled by a dedicated core, which is implemented specifically to handle power management. This can manage more than 20 different power-mode configurations across processing domains, helping developers properly utilise the flexible power-saving opportunities available.
What Power-Management Features are Available in i.MX 8 Processors?
In addition, i.MX processors use Dynamic Voltage and Frequency Scaling (DVFS), which reduces both frequency and voltage to complete required tasks with the lowest possible power consumption. The way the voltage and frequency are changed in response to load changes is determined in software. DVFS can be highly effective because power is reduced according to the square of the voltage. There is also Dynamic Process Temperature Compensation (DPTC), which adjusts the voltage in relation to die temperature to prevent power losses that result from temperature increase.
There is also heterogeneous – or big.LITTLE – processing using a combination of Arm Cortex-A application processor cores and a Cortex-M microcontroller (MCU) core. The MCU core, running an RTOS, handles low-level and real-time tasks efficiently and allows the device to remain aware in a low-power state ready to wake the higher-performing Cortex-A cores when needed.
In addition, active well biasing allows CMOS transistors to be optimised for high performance in active modes while also minimising leakage in standby mode. The leakage can be reduced by up to 15 times.
How do System Power Modes Work to Reduce Power Consumption?
The various system power modes take advantage of these features to slow down, halt, or turn off various parts of the device to save power while ensuring all required functions are performed properly. In Run mode, the normal operating mode, the core frequency, and operating voltage can be dynamically changed within a range. In Wait and Doze modes, certain clocks are gated and operation resumes on receipt of an interrupt. In State-Retention mode, the MCU and peripheral clocks are gated and the supply voltage is reduced to a minimum. There is also a Deep-Sleep mode, in which clocks are gated, power to the Arm platform is turned off, and normal operation resumes on interrupt. In Hibernate, on the other hand, all clocks and power domains are off and operation resumes in the same way as a cold boot.
Ultra-low-power devices can have even more system power modes to give a really granular control: this is where the µPower subsystem of the i.MX 8ULP and i.MX 8ULP-CS families comes in, with its dedicated RISC-V core to manage the device’s 20 power modes.
This blog gives an overview of the mechanisms available to help manage the power consumption of applications running on i.MX 8 processors. Utilising them to best effect demands extensive study that can still leave your application consuming more power than is ideal. At Anders, our embedded-systems engineers have extensive experience in minimising the power consumption of i.MX 8 processors and modules, for lower energy demands and longer battery life. Contact us today to find out how we can help your next design do more with less.
For further information, please visit our website at https://www.andersdx.com/.