Minimum parts for maximum efficiency. PFLITSCH extends its range of splittable cable entries with the fully splittable UNI Split Gland® plastic cable gland. The cable gland body and the pressure screw consist of two halves, the sealing inserts are slit at the side and thus allow preassembled cables to be placed in them. The special point about the UNI Split Gland®: the splittability of the cable gland body allows the whole of the hole diameter (M25) to be used for feeding through prefitted plugs

The UNI Split Gland® is based on the UNI Dicht® principle and therefore ensures the cable is dependably sealed without being irreparably cut into or severely indented. All TPE-V sealing inserts size E 154 from the UNI Dicht® range – from the solid to the multiple-cable sealing insert – can be used with the split cable gland. This product reliably seals cables with diameters from 2.0 mm up to 20.5 mm. The softsquashing action exerted by the sealing insert over a large area of the cable sheath, the seal in the plane of the split and a further seal at the connection thread ensure that the gland achieves IP 67 protection in accordance with EN 60529. The UNI Split Gland® made from polycarbonate also excels with strain relief in accordance with EN 50262 and an operating temperature range of -20°C to +80°C. Replacement needed – no problem The splittability of the cable gland allows not only preassembled cables to be installed, through its simple construction and low number of components it also offers the advantage of quick and safe installation – without needing to remove already installed cables or interrupt on-going production. The UNI Split Gland® can be opened again at any time without great effort to allow cables to be installed or reinstalled later. Conventional developments Installing the UNI Split Gland® is quick and easy thanks to its few components: place the cable into the sealing insert – PFLITSCH has a practical set of spreading pliers available to help with this – fit the two halves of the cable gland body around the cable already in the sealing insert, bring the two halves together ready to engage and finally engage them. The cable gland body is now installed in the housing – either screwed into the thread or fastened with a splittable counter nut from the inside – and the sealing insert pushed into it. Then the two halves of the pressure screw are placed around the cable, locked with one another.


  • Protection class IP 67
  • Allows a cable gland to be replaced without interruption of production (deinstallation/installation can be done without the cable having to be removed)
  • M25 connection thread
  • For cable diameters of 2.0 mm to 20.5 mm
  • TPE-V sealing inserts from the UNI Dicht® modular range

Visit us on the Pflitsch stand D70 hall 8 in Frankfurt & stand E99 hall 8 in Hannover 

Walter Logan & Co represent Pflitsch & Co in the UK and Ireland, or any more information, please contact Peter Campbell on 02084460161 or