The SCHURTER 6610 is the first of its kind appliance outlet using IDC terminal technology. This novel product allows significant reduction of labour costs by supporting a more efficient assembly method. Multiple outlets can be banked and wire connections can be bussed, connecting the terminals all at once. The product is especially suited for power distribution units and appliances with multiple power outputs.
The IEC F appliance outlet is equipped with IDC terminals and available for two different wiring versions, “along” and “across” to the connector pin axis. The terminals accept insulated solid wires with cross section AWG12 / 2.5mm2 and AWG16 / 1.0 – 1.5mm2. The component is designed for snap-in mounting and comes with a protection cover. The cover aids in pressing the wires and, at the same time protects from electrical shock. Special versions with an individual quick connect or solder line terminal are available. The series has ENEC and cURus approvals and is suitable for applications in accordance with IEC/EN 60950.
– Appliance outlet F according to IEC 60320 with IDC terminals
– Cross sections: AWG12 / 2.5mm2 or AWG16 / 1-1.5mm2
– Snap-in mounting for panel thicknesses 0.8 mm – 3.0 mm
– ENEC & cURus approvals for 10 A / 15 A at 250 VAC (AWG 16 version not UL approved)
Should you have any questions regarding these or other SCHURTER products, please contact:
Unit 8, Clock Park
West Sussex, PO22 9NH
Phone: +44 (0)1243 810 810