Axair Fans are proud to announce the launch of their newly designed enclosure cooling ecommerce site: www.axaironline.co.uk. The new site enables users of enclosure climate control to open their own online buying account, apply for credit, read technical articles, breeze through the checkout process with ease and access or export technical documentation for every product listed.
Registered account customers can use the fast order process and buy at their agreed net pricing without the hassle of emailing our team or creating purchase orders. Orders can then be requested for a set delivery date, shipped Nationally, or collected from our Newcastle under Lyme warehouse once ready.
A Guide to Enclosure Cooling
The overheating of expensive equipment through failing to provide active enclosure ventilation is by far the main cause of failure within electrical cabinets. In addition, effective enclosure ventilation significantly increases the lifespan and energy efficiency of equipment as well as protection from dust and water splashes (IP54).
The simple answer lies in a combined fan and filter unit. Filter fans have been in use for around 20 years and used in a whole host of enclosures and cabinets to facilitate the effective running of the equipment it is housed in. Over this time their function has not changed, so in cooling the enclosure and its components their role is still as useful as ever, if not a vital part of the design of the system. However, if the wrong product is selected, the whole control cabinet may overheat and compromise not only the value of the equipment it contains, but also the panel’s primary function, powering a whole process plant, shopping centre or datacentre. The impact of this could be catastrophic so it pays to seek advice and assistance when selecting a system for your power electronics cooling.
Fan Selection
The key main points of consideration are the maximum ambient temperature that the components can tolerate and the equipment heat loss figures. A simple equation can then be used which considers the air density and then determines the required air volume flow rate.
For basic level enclosure ventilation, the industry offers a range of fan filter units. The fitted fans should be of ball bearing construction and the cover should be easy to remove to access the filter media. If the mechanism is not straight forward then this risks the probability that it will not get changed. Inevitably resulting in problems in the long run.
Air flow
In a standard filter fan the fan sucks air into an enclosure, first through the louvre, then the filter. Warm air exits through a filter louvre, generally of the same dimensions as the inlet, but larger if necessary to improve the flow rate.
Where the required minimum flow rate is not available from an integrated fan and filter there is an enormous range of axial and centrifugal fans to choose from, either in standard form or within roof mounted units. In some cases, it is possible to take a high-performance fan and use it in conjunction with several standard filters, sized to achieve the ideal airflow whilst coping with the ingress protection requirement IP54 or IP55. For hot spot cooling you may look to use either frame axial fans or small centrifugal blowers.
Condensation control
Outdoor equipment is particularly prone to condensation given the change in temperature as daytime warmth turns to the cold of the night. Condensation may also form in indoor enclosures when humidity levels are too high and temperatures vary. It occurs when warm moist air comes into contact with cooler surfaces. This can cause electrical equipment housed within enclosures to fail prematurely.
Condensation will only form at, or close to Dew point (65% humidity), but oxidation / rusting can take place at medium levels of relative humidity at 60% depending on the type and levels of contaminants in the air /water mixture.
By keeping an enclosure at a temperature of as little as 5 degrees higher than that of the ambient temperature, condensation can be eliminated. The warmer the air, the more water vapour it can contain. When air is cooled it can no longer hold the water vapour and reaches its dew point – this is where condensation arises.
The most effective solution to prevent condensation includes heaters, hygrostats and thermostats. Heaters are typically applied to enclosures to ensure they stay above the minimum operating temperature and to control condensation formation.
In summary, there is an answer to every problem of enclosure ventilation but at the extreme there is a need to utilise or combine standard products to make special solutions. For full thermal management components including fan filters, heaters, thermostats and adaptors visit the Axair Fans online website www.axaironline.co.uuk.
Axair Fans
Tel: 01782 349 430
Email: sales@axair-fans.co.uk
